HOLD PLAY AND RECORD WHILE POWERING
ON. { "DRUM ON" HRS WILL NOT BE RESET. }
ALESIS
ADAT-LX-20
HOLD RECORD WHILE POWERING ON. {
"DRUM ON" HRS WILL NOT BE RESET. }
ALESIS
ADAT-XT
HOLD PLAY AND RECORD WHILE POWERING
ON. { "DRUM ON" HRS WILL NOT BE RESET. }
ALESIS
ADAT-XT-20
HOLD PLAY AND RECORD WHILE POWERING
ON. { "DRUM ON" HRS WILL NOT BE RESET. }
ALESIS
AI-2
HOLD STORE WHILE POWERING ON. { ADAT
TAPE HEAD INFO WILL ALSO BE CLEARED. }
ALESIS
BRC
HOLD PLAY AND RECORD WHILE POWERING
ON.
ALESIS
D4
HOLD VOICE AND OUTPUT WHILE POWERING
ON.
ALESIS
DM5
HOLD VOICE AND OUTPUT WHILE POWERING
ON.
ALESIS
HR-16
HOLD ERASE, DELETE AND RECORD WHILE
POWERING ON.
ALESIS
HR-16B
HOLD ERASE, DELETE AND RECORD WHILE
POWERING ON.
ALESIS
M-20
HOLD PLAY AND RECORD WHILE POWERING
ON. { "DRUM ON" HRS WILL NOT BE RESET. }
ALESIS
MIDIVERB 4
HOLD 'D' AND 'PROG' WHILE POWERING ON.
ALESIS
MIDIVERB III
HOLD STORE AND INT PROG WHILE
POWERING ON.
ALESIS
MMT-8
HOLD ERASE, PAGE UP AND PAGE DOWN
WHILE POWERING ON.
ALESIS
Q-20
SOFT RESET: HOLD PROGRAM AND COMPARE
AND POWER ON. (SETS GLOBAL TO DEFAULT, CLEARS EDIT BUFFER, LEAVES USER
MEMORY INTACT).
ALESIS
Q-20
HARD RESET: HOLD "PROGRAM", "COMPARE"
AND "-BLOCK" AND POWER ON. (SETS ALL FUNCTIONS TO DEFAULT AND CLEARS
USER MEMORY).
ALESIS
QS6
HOLD KEYPADS '0' AND '3' WHILE
TURNING ON POWER.
ALESIS
QS6 KEYBOARD
HOLD KEYPADS '0' AND '3' WHILE
TURNING ON POWER.
ALESIS
QS7
HOLD KEYPADS '0' AND '3' WHILE
TURNING ON POWER.
ALESIS
QS8
HOLD KEYPADS '0' AND '3' WHILE
TURNING ON POWER.
ALESIS
QSR
HOLD BOTH SIDES OF "CURSOR" BUTTON
WHILE POWERING ON.
ALESIS
QUADRASYNTH KBDS
HOLD DATA BUTTONS '1' AND '4' WHILE
POWERING ON. ( CLEARS EDIT BUFFER ONLY; THERE IS NO HARD RESET).
ALESIS
QUADRAVERB
HOLD BYPASS AND PROGRAM THEN POWER ON.
ALESIS
QUADRAVERB 2
SOFT RESET: HOLD PROGRAM AND COMPARE
AND POWER ON. ( SETS GLOBAL TO DEFAULT, CLEARS EDIT BUFFER, LEAVES USER
MEMORY INTACT).
ALESIS
QUADRAVERB 2
HARD RESET: HOLD "PROGRAM", "COMPARE"
AND "-BLOCK" AND POWER ON. (SETS ALL FUNCTIONS TO DEFAULT AND CLEARS
USER MEMORY).
ALESIS
QUADRAVERB GT
HOLD BYPASS AND PROGRAM WHILE TURNING
ON THE POWER.
ALESIS
S4 SOUND MODULE
HOLD DATA BUTTONS '1' AND '4' WHILE
POWERING ON. (CLEARS EDIT BUFFER ONLY; THERE IS NO HARD RESET).
ALESIS
S8 SOUND MODULE
HOLD DATA BUTTONS '1' AND '4' WHILE
POWERING ON. ( CLEARS EDIT BUFFER ONLY; THERE IS NO HARD RESET.
)<
ALESIS
SR-16
HOLD PLAY AND ERASE WHILE TURNING ON
POWER.
ALESIS
WEDGE
HOLD BYPASS AND PROG WHILE TURNING ON
THE POWER.
ALESIS
X2 CONSOLE
HOLD 'ALT', 'ERASE FWD' AND 'DEC'
WHILE POWERING ON. ( THIS IS SOFT RESET; FACTORY MUTE PARAMETERS WILL
BE LOADED INTO MEMORY. )
ART
ART
ALPHA
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
ALPHA 2.0
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
BCC
HOLD STORE, PARAMETER, AND VALUE
BUTTONS + POWER ON.
ART
DRX
PRESS PRESET DOWN, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
DRX 2100
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
DRX 2100 SE
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
DST 820
PRESS PREAMP SELECT, PARAMETER
SELECT, AND SAVE SIMULTANEOUSLY.
ART
DST 830
PRESS PREAMP SELECT, PARAMETER
SELECT, AND SAVE SIMULTANEOUSLY.
ART
DST-4
PRESS DISTORTION SELECT, PARAMETER
EDIT, AND SAVE SIMULTANEOUSLY.
ART
DST-EIGHTY/EIGHTY
PRESS DISTORTION SELECT, PARAMETER
EDIT, AND SAVE BUTTONS SIMULTANEOUSLY.
ART
DXR ELITE
PRESS BANK, SOFT KEY, AND BYPASS
BUTTONS SIMULTANEOUSLY.
ART
ECC
HOLD STORE, PARAMETER, AND VALUE
BUTTONS + POWER ON.
ART
EFFECTS NETWORK
PRESS VALUE, SAVE, AND BYPASS BUTTONS
SIMULTANEOUSLY.
ART
FXR ELITE
PRESS PRESET UP, DRY KILL, AND BYPASS
BUTTONS SIMULTANEOUSLY.
ART
FXR ELITE II
PRESS MIX, STORE, AND BYPASS BUTTONS
SIMULTANEOUSLY.
ART
MULTIVERB
PRESS PRESET DOWN, 0, AND 4
SIMULTANEOUSLY.
ART
MULTIVERB ALPHA SE
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
MULTIVERB EXT
PRESS PRESET DOWN, 0, AND 4
SIMULTANEOUSLY.
ART
MULTIVERB II
PRESS PRESET DOWN, 0, AND 4
SIMULTANEOUSLY.
ART
MULTIVERB IIITD>
PRESS PRESET DOWN, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
MULTIVERB LT
No factory reset, remove battery for
more than 5 hours.
ART
MULTIVERB LTX
No factory reset, remove battery for
more than 5 hours.
ART
NIGHT BASS
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
NITRO
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
PRO GATE
PRESS BYPASS, 8, AND SELECT
SIMULTANEOUSLY.
ART
PROVERB
No factory reset. remove battery for
more than 5 hours.
ART
PROVERB 200
No factory reset. remove battery for
more than 5 hours.
ART
RXR ELITE
PRESS BANK, DRY KILL, AND BYPASS
BUTTONS SIMULTANEOUSLY.
ART
SGE
HOLD PRESET DOWN, ADD EFFECT, AND
MIDI/UTILITY WHILE POWERING ON.
ART
SGE MACH II
PRESS PRESET DOWN, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
SGX 2000
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
SGX 2000 EXPRESS
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
SGX LT
No factory reset, remove battery for
more than 5 hours.
ART
SGX NIGHTBASS SE
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
SGX T2
PRESS PRESET, 0, AND 4 BUTTONS
SIMULTANEOUSLY.
ART
X12
PRESS UP, 2, AND 5 PADS
SIMULTANEOUSLY.
ART
X15 ULTRAFOOT
PRESS UP, 1, AND 5 PADS
SIMULTANEOUSLY.
BOSS
BOSS
SE50
Power on whilst holding down PARAM UP
and VALUE UP. Press WRITE, wait for three seconds and the press WRITE
again
DIGITECH
DIGITECH
DHP 33
PRESS UTILITY BUTTON, SCROLL TO THE
FACTORY RESTORE MENU, TURN EITHER DATA KNOB COUNTER-CLOCKWISE, THEN
PRESS STORE.
DIGITECH
DHP 55
PRESS UTILITY BUTTON, SCROLL TO THE
FACTORY RESTORE MENU, PRESS PARAMETER EDIT, THEN LOAD.
DIGITECH
DSP 128
HOLD PARAMETER EFFECT AND SELECT,
THEN POWER ON.
DIGITECH
DSP 128+
HOLD PARAMETER DOWN AND LEFT, THEN
POWER ON.
DIGITECH
DSP 256
HOLD UTILITY, POWER ON, THEN PRESS
PARAMETER UP.
DIGITECH
DSP 256XL
HOLD UTILITY, POWER ON, THEN PRESS
PARAMETER UP.
DIGITECH
FX 7
PRESS/HOLD STORE, POWER ON, WAIT
UNTIL "RS" APPEARS IN THE DISPLAY THEN RELEASE STORE.
DIGITECH
G7
PRESS AND HOLD PROGRAM, POWER ON THEN
PRESS THE STORE BUTTON.
DIGITECH
GFX 1
HOLD UTILITY BUTTON, POWER ON, THEN
PRESS PARAMETER UP.
DIGITECH
GSP 21
HOLD TITLE BUTTON, POWER ON.
DIGITECH
GSP 21 LEGEND
HOLD UTILITY BUTTON, POWER ON, THEN
PRESS PARAMETER UP.
DIGITECH
GSP 21 PRO
HOLD UTILITY BUTTON, POWER ON, THEN
PRESS PARAMETER UP.
DIGITECH
GSP 2112
HOLD THE PREAMP BUTTON, POWER ON.
WHEN THE ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS THE MOD
BUTTON.
DIGITECH
GSP 5
HOLD PARAMETER DOWN THEN POWER ON.
DIGITECH
GSP 7
HOLD UTILITY BUTTON, POWER ON, THEN
PRESS PARAMETER UP.
DIGITECH
GSP2101
HOLD ACCESS 1 BUTTON, POWER ON. AFTER
* APPEARS IN THE UPPER LEFT OF THE LCD PRESS PROGRAM UP
DIGITECH
IPS 33
HOLD BOTH FUNCTION SELECT BUTTONS
THEN POWER ON.
DIGITECH
IPS 33B
PRESS UTILITY BUTTON, SCROLL TO THE
FACTORY RESTORE MENU, PRESS PARAMETER DOWN, THEN STORE.
DIGITECH
LEGEND II
HOLD STORE, POWER ON. AFTER * APPEARS
IN THE UPPER LEFT CORNER OF THE LCD PRESS PARAMETER UP.
DIGITECH
MEQ 14
HOLD PROGRAM BUTTON THEN POWER ON.
DIGITECH
MEQ 28
HOLD PROGRAM BUTTON THEN POWER ON.
DIGITECH
MEQ 7
HOLD PROGRAM BUTTON THEN POWER ON.
DIGITECH
MSP 4
HOLD THE DOWN AND LEFT BUTTONS THEN
POWER ON.
DIGITECH
PMC 10
PRESS AND HOLD FOOTSWITCH "ONE",
POWER ON, THEN PRESS THE "SELECT" FOOTSWITCH.
DIGITECH
RP 1
HOLD UTILITY BUTTON, POWER ON, THEN
PRESS PARAMETER UP.
DIGITECH
RP 10
HOLD NAME, POWER ON. AFTER * APPEARS
IN THE UPPER LEFT CORNER OF LCD PRESS PROGRAM UP.
DIGITECH
RP 12
HOLD NAME, POWER ON. AFTER * APPEARS
IN THE UPPER LEFT CORNER OF LCD PRESS PROGRAM UP.
DIGITECH
RP 5
HOLD PARAMETER SELECT UP BUTTON THEN
POWER ON.
DIGITECH
RP 6
HOLD PARAMETER SELECT UP BUTTON THEN
POWER ON.
DIGITECH
S-5000
PRESS UTILITY BUTTON, SCROLL TO THE
FACTORY RESTORE MENU, PRESS PARAMETER EDIT, THEN LOAD.
DIGITECH
STUDIO 400
PRESS AND HOLD THE "1" BUTTON, POWER
ON. WHEN THE ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS PROGRAM.
DIGITECH
STUDIO QUAD
PRESS AND HOLD THE "1" BUTTON, POWER
ON. WHEN THE ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS PROGRAM.
DIGITECH
SV 5
PRESS UTILITY BUTTON, SELECT THE INIT
MENU, PRESS THE STORE BUTTON TWICE (AS PROMPTED).
DIGITECH
TEC 8
PRESS AND HOLD BOTH LOW EQ AND MID
EQ, POWER ON.
DIGITECH
TSR 12
HOLD NAME + POWER ON. AFTER * APPEARS
IN THE UPPER LEFT CORNER OF LCD PRESS PROGRAM UP.
DIGITECH
TSR 24
HOLD ACCESS 1 BUTTON, POWER ON. AFTER
* APPEARS IN THE UPPER LEFT OF THE LCD PRESS PROGRAM UP.
DIGITECH
TSR 6
PRESS AND HOLD EQ BUTTON, POWER ON.
WAIT FOR "FA" TO APPEAR IN THE DISPLAY THEN PRESS STORE. NOTE: "FH"
WILL APPEAR BRIEFLY TO ACKNOWLEDGE RE-INITIALIZATION.
DIGITECH
VALVE FX
HOLD STORE, POWER ON. AFTER * APPEARS
IN THE UPPER LEFT CORNER OF LCD PRESS PARAMETER UP.
DIGITECH
VHM 5
PRESS UTILITY BUTTON, SCROLL TO THE
FACTORY RESTORE MENU, PRESS PARAMETER DOWN, THEN STORE.
DIGITECH
VOCALIST II
PRESS UTILITY BUTTON, SCROLL TO THE
FACTORY RESTORE MENU, PRESS PARAMETER DOWN, THEN STORE.
DIGITECH
XP PEDALS
PRESS/HOLD THE BYPASS/(HOLD)TUNER
FOOTSWITCH AND POWER ON.
ENSONIQ
ENSONIQ
DP-PRO
HOLD SYSTEM BUTTON AND PRESS CANCEL.
RELEASE BOTH BUTTONS, PRESS ENTER.
ENSONIQ
DP/2
HOLD SYSTEM/MIDI AND PRESS THE "B"
BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS WRITE BUTTON
AT PROMPT.
ENSONIQ
DP/4
HOLD SYSTEM/MIDI AND PRESS THE "B"
BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS WRITE BUTTON
AT PROMPT.
ENSONIQ
DP/4+
HOLD SYSTEM/MIDI AND PRESS THE "B"
BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS WRITE BUTTON
AT PROMPT.
ENSONIQ
ESQ-M
PRESS PARAM, PRESS STORAGE. HOLD
SCROLL, PRESS MASTER. RELEASE BOTH, SCROLL TO SELECT MEMORY PRESET
PAGE. HOLD SCROLL, PRESS STORAGE. RELEASE BOTH, PRESS ( [ ).
ENSONIQ
FIZMO
HOLD THE SAVE BUTTON AND PRESS
COMPARE. PRESS THE YES BUTTON AT THE PROMPT.
ENSONIQ
FIZMO RACK
HOLD THE SAVE BUTTON AND PRESS
COMPARE. PRESS THE YES BUTTON AT THE PROMPT.
ENSONIQ
KS-32
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
KT-76
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD THE UPPER 9 BUTTON AND THEN PRESS THE LOWER 9.RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
KT-88
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD THE UPPER 9 BUTTON AND THEN PRESS THE LOWER 9.RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
MR-61/76
HOLD THE ERASE BUTTON (IN THE SONG
EDITOR SECTION) AND POWER ON.
ENSONIQ
MR-RACK
HOLD SAVE AND PRESS ENTER, THEN PRESS
ENTER AT THE PROMPT.
ENSONIQ
SD-1
HOLD PRESET BUTTON AND PRESS SOFT #1
BUTTON (UPPER LEFT CORNER OF SCREEN). RELEASE BOTH, PRESS YES AT THE
PROMPT.
ENSONIQ
SQ-1 ( 21 VOICE )
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
SQ-1/32
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
SQ-2 ( 21 VOICE )
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
SQ-2/32
PRESS EDIT/SEQUENCES (PRESETS). PRESS
AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND
PRESS YES AT THE PROMPT.
ENSONIQ
SQ-80
HOLD THE RECORD BUTTON AND PRESS THE
#1 SOFT BUTTON (UPPER LEFT CORNER OF SCREEN). RELEASE BOTH BUTTONS,
PRESS YES AT THE PROMPT.
ENSONIQ
SQ-R
HOLD SYSTEM BUTTON. QUICKLY PRESS
"NO" THEN RELEASE BOTH BUTTONS. PRESS YES AT PROMPT.
ENSONIQ
TS-10
HOLD PRESETS BUTTON AND PRESS SOFT 1
BUTTON (UPPER LEFT CORNER OF DISPLAY). RELEASE BOTH BUTTONS. SELECT YES
AT THE PROMPT.
ENSONIQ
TS-12
HOLD PRESETS BUTTON AND PRESS SOFT 1
BUTTON (UPPER LEFT CORNER OF DISPLAY). RELEASE BOTH BUTTONS. SELECT YES
AT THE PROMPT.
ENSONIQ
VFX
HOLD PRESETS BUTTON, PRESS SOFT 1
BUTTON (UPPER LEFT CORNER OF SCREEN). SELECT YES AT PROMPT.
ENSONIQ
VFX/SD
HOLD PRESET BUTTON AND PRESS SOFT #1
BUTTON (UPPER LEFT CORNER OF SCREEN). RELEASE BOTH, PRESS YES AT THE
PROMPT.
ENSONIQ
ZR-76
HOLD THE ERASE BUTTON (IN THE SONG
EDITOR SECTION) AND POWER ON.
KORG
KORG
01W
HOLD RESET AND COMPARE THEN POWER ON.
KORG
01WFD
HOLD RESET AND COMPARE THEN POWER ON.
KORG
A1
HOLD WRITE AND -1 THEN POWER ON.
KORG
A2
HOLD DOWN ARROW AND UP ARROW, POWER
ON, PRESS "E" (YES).
KORG
A3
HOLD DOWN ARROW AND UP ARROW, POWER
ON, PRESS "E" (YES).
KORG
A4
HOLD WRITE AND BYPASS, THEN POWER ON.
KORG
AM8000-R
HOLD FX1 AND FX2 THEN POWER ON.
KORG
C-505
MIDI/TRANSPOSE + SPLIT AND RESTART
UNIT.
KORG
DDD-1
HOLD YES AND NO, THEN POWER ON.
KORG
DL8000-R
HOLD "MS/D" AND "HOLD", THEN POWER
ON.
KORG
DS-8/707
HOLD UP AND DOWN, THEN POWER ON.
KORG
I1
HOLD PROGRAM AND DISK, THEN POWER ON.
KORG
I2
HOLD ARR PLAY AND EDIT STYLE THEN
POWER ON.
KORG
I3
HOLD ARR PLAY AND EDIT STYLE THEN
POWER ON.
KORG
I30
HOLD ARRANGE PLAY AND GLOBAL, THEN
POWER ON.
KORG
I4S
HOLD ARR. PLAY AND PROGRAM, THEN
POWER ON.
KORG
I5M
HOLD ARR. PLAY AND GLOBAL, THEN POWER
ON.
KORG
I5S
HOLD ARR. PLAY AND GLOBAL, THEN POWER
ON.
KORG
IH
HOLD DETUNE AND BASS, THEN POWER ON.
KORG
IS40/50/I40M
HOLD ARR. PLAY AND GLOBAL, THEN POWER
ON.
KORG
KARMA
HOLD ENTER AND 0, THEN POWER ON.
KORG
M1
HOLD INT, CARD, AND COMBI THEN POWER
ON.
KORG
M1R
HOLD INT, PROG, AND COMBI THEN POWER
ON.
KORG
M3R
PAGE 5D OF GLOBAL MODE.
KORG
N264
HOLD ENTER AND 7, THEN POWER ON.
KORG
N364
HOLD ENTER AND 7, THEN POWER ON.
KORG
O5RW
HOLD +1 AND -1 THEN POWER ON.
KORG
SG-PROX
HOLD PROGRAM AND PIANO 1, THEN POWER
ON.
KORG
SG-RACK
HOLD EDIT AND A4, THEN POWER ON.
KORG
T SERIES
HOLD LOWER KEYPAD 0 AND PROG A, POWER
ON, AND THEN IMMEDIATELY TURN OFF.
KORG
TR-RACK
HOLD EDIT AND A4, THEN POWER ON.
KORG
TRITON
HOLD ENTER AND 0, THEN POWER ON.
KORG
TRITON RACK
HOLD ENTER AND 0, THEN POWER ON.
KORG
X3
HOLD ENTER AND CURSOR DOWN THEN POWER
ON.
KORG
X3R
HOLD ENTER AND CURSOR DOWN THEN POWER
ON.
KORG
X5
HOLD +1 AND -1, THEN POWER ON.
KORG
X5D
HOLD +1 AND -1 THEN POWER ON.
KORG
X5DR
HOLD +1 AND -1 THEN POWER ON.
KORG
Z1
HOLD SW1 AND SW2, THEN POWER ON.
KORG
Z1EX
HOLD SW1 AND SW2, THEN POWER ON.
KURZWEIL
KURZWEIL
K2000
HOLD "1", "2" AND "3" BUTTONS AND
POWER ON. AFTER POWER UP PRESS ENTER. {EXCEPT V1.0 OS )
KURZWEIL
K2000
OS VERSION 1.O: POWER OFF AND UNPLUG.
REMOVE BATTERIES FOR @ 60-90 MINUTES. REINSTALL BATTERIES. POWER ON.
KURZWEIL
K2500
AT POWER ON WHEN SCREEN DISPLAYS
"PLEASE WAIT" PRESS THE EXIT BUTTON. AT MENU, SELECT HARD RESET AND
FOLLOW DIRECTIONS.
OBERHEIM
OBERHEIM
MATRIX-6
HOLD STORE WHILE POWERING ON.
PEAVEY
PEAVEY
ADDVERB
HOLD THE - AND 5 KEYS THEN POWER ON.
PEAVEY
ADDVERB II
HOLD THE - AND 5 KEYS THEN POWER ON.
PEAVEY
ADDVERB III
HOLD THE ADD/DEL AND GLOBAL BUTTONS,
POWER ON.
PEAVEY
AEQ 2800
HOLD THE MIDI AND ASSIGN KEYS THEN
POWER ON.
PEAVEY
AUTOGRAPH
HOLD THE MIDI AND ASSIGN KEYS THEN
POWER ON.
PEAVEY
BASSFEX
HOLD THE PLAY AND GLOBAL BUTTONS THEN
POWER ON.
PEAVEY
CEQ 28
HOLD THE MIDI AND ASSIGN KEYS THEN
POWER ON.
PEAVEY
CEX 4
HOLD THE MASTER AND STORE/MEMORY
BUTTONS THEN POWER ON.
PEAVEY
CEX 4L
HOLD THE MASTER AND STORE/MEMORY
BUTTONS THEN POWER ON.
PEAVEY
CYBERBASS (MODULE)
HOLD THE PROGRAM AND RIGHT CURSOR
BUTTONS THEN POWER ON.
PEAVEY
DPM 2
HOLD 0 BUTTON, PRESS ENTER. RELEASE
BOTH BUTTONS AND PRESS ENTER.
PEAVEY
DPM 4
HOLD SAVE BUTTON, PRESS PAUSE. PRESS
ENTER WHEN PROMPTED.
PEAVEY
DPM C8
HOLD THE 0 AND ENTER BUTTONS, POWER
ON, WAIT FORTHE "UNIT INITIALIZED" DISPLAY THEN RELEASE THE BUTTONS.
PEAVEY
DPM C8P
HOLD THE 0 AND COPY BUTTONS, POWER
ON, WAIT FOR THE "UNIT INITIALIZED" DISPLAY THEN RELEASE THE BUTTONS.
PEAVEY
DPM SI
TURN POWER ON. HOLD '0' AND PRESS
ENTER. PRESS ENTER AT THE PROMPT TO RE-INITIALIZE KEYBOARD.
PEAVEY
DSR 1000
HOLD THE - AND 5 KEYS THEN POWER ON.
PEAVEY
LIBRARIAN
HOLD LOAD, SAVE, AND UTIL BUTTONS AND
POWER ON.
PEAVEY
MAP 8X4
HOLD BYPASS + POWER WHILE PLUGGING
UNIT IN.
PEAVEY
MFP 2128/MIDI MANA
HOLD + AND - KEYS THEN POWER ON
PEAVEY
MIDI MANAGER
HOLD + AND - KEYS THEN POWER ON.
PEAVEY
MIDI MASTER
HOLD FUNCTION AND PROC A KEYS THEN
POWER ON.
PEAVEY
MIDI MASTER II
HOLD FUNCTION AND PROC A KEYS THEN
POWER ON.
PEAVEY
MIDI STREAMER
HOLD THE RECORD (SYSX, SAMP, + SEQ)
KEYS AND POWER ON. AT PROMPT PRESS START TO RE-INITIALIZE.
PEAVEY
MULTIFEX
HOLD THE 2 KEYS NEXT TO DISPLAY AND
POWER ON.
PEAVEY
PC 1600
HOLD THE UTILITY + ENTER KEYS AND
POWER ON.
PEAVEY
PC4-X
HOLD THE MASTER + MIDI KEYS AND POWER
ON.
PEAVEY
PC4-XL
HOLD THE MASTER + MIDI KEYS AND POWER
ON.
PEAVEY
PGP 20
HOLD THE A/B + MUTE KEYS AND POWER
ON.
PEAVEY
PLM 8128
PRESS TWO RIGHT-MOST SOFT KEYS IN
BOTTOM ROW AND POWER ON. (VCA CAL UNAFFECTED)
PEAVEY
PLM 8128E
HOLD THE SOLO AND MUTE KEYS, POWER
ON. (VCA CAL UNAFFECTED)
PEAVEY
PROFEX
HOLD THE PLAY AND MIDI KEYS THEN
POWER ON.
PEAVEY
PROFEX II
HOLD THE PLAY AND GLOBAL BUTTONS,
POWER ON.
PEAVEY
PROGRAMAX
HOLD THE A/B AND MUTE KEYS THEN POWER
ON.
PEAVEY
PV LITE 3000
FACTORY PRESETS: HOLD CHASE + AUTO
SOUND, POWER ON. HARD RESET: HOLD DOWN + STORE, POWER ON. IN BOTH
CASES, HOLD UNTIL 00 APPEARS IN THE DISPLAY.
PEAVEY
SDR 20/20
HOLD THE PLAY AND STORE KEYS WHILE
POWERING ON.
PEAVEY
SPECTRUM ANALOG FI
HOLD THE DEC AND EXEC BUTTONS, POWER
ON. ( TO INIT. FOR USE W/ CYBERBASS, HOLD DEC AND BYPASS THEN POWER ON.
PEAVEY
SPECTRUM BASS II
HOLD THE + AND - BUTTONS THEN POWER
ON.
PEAVEY
SPECTRUM ORGAN
HOLD THE + AND - BUTTONS THEN POWER
ON.
PEAVEY
SPECTRUM SYNTH
HOLD THE + AND - BUTTONS THEN POWER
ON.
PEAVEY
ULTRAVERB
HOLD THE - AND 5 KEYS THEN POWER ON.
PEAVEY
ULTRAVERB II
HOLD THE + AND 9 BUTTONS THEN POWER
ON.
ROLAND
ROLAND
A-220
HOLD B AND MEMORY THEN POWER ON.
ROLAND
A-30
HOLD WRITE WHILE POWERING ON (30
SECONDS)
ROLAND
A-33
HOLD WRITE WHILE POWERING ON (30
SECONDS)
ROLAND
A-37
HOLD WRITE BUTTON AND POWER ON.
DISPLAY SHOWS FACTORY SETUP AT COMPLETION.
ROLAND
A-50
HOLD 1ST+3RD+4TH BUTTONS UNDER
DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY.
ROLAND
A-80
HOLD 1ST+3RD+4TH BUTTONS UNDER
DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY.
ROLAND
A-880
HOLD SIGNAL AND MEMORY THEN POWER ON.
ROLAND
A-90
HOLD EDIT, POWER ON THEN PRESS ENTER.
WITH VOICE EXPANDER BOARD: HOLD MANUAL, POWER ON, THEN PRESS ENTER.
ROLAND
A90EX
HOLD MANUAL BUTTON AND POWER ON. THEN
PRESS ENTER.
ROLAND
ADA-8024
no rom reset.
ROLAND
ALPHA JUNO-1
no rom reset.
ROLAND
ALPHA JUNO-2
no rom reset.
ROLAND
AP-700
PWR ON, EXIT REPEATEDLY TO
ANALYZER/FILTER SCREEN. CURSOR TO: MENU + ENTER, SYSTEM + ENTER, INIT +
ENTER. USE VALUE SELECT ALL THEN EXEC + ENTER TWICE.
ROLAND
AR SERIES
no rom reset.
ROLAND
AT SERIES
HOLD ONE TOUCH PROGRAM + POWER ON.
ROLAND
AX-1
HOLD WRITE BUTTON + POWER ON (HOLD 30
SECONDS).
ROLAND
AXIS-1
POWER ON. HOLD FUNCTION; PRESS F#0,
C#2, AND D#2 KEYS.
ROLAND
CA-30
RESETS EVERY TIME TOGGLED OF AND THEN
ON.
ROLAND
CDX1
PRESS UTILITY. CURSOR RIGHT, SELECT
INIT AND PRESS ENTER THEN CURSOR TO GLOBAL. PRESS ENTER THREE TIMES.
ROLAND
CR ( ALL OTHER)
no rom reset.
ROLAND
CR-80
DEL + REPEAT + POWER ON, THEN PRESS
ENTER.
ROLAND
CSQ SERIES
no rom reset.
ROLAND
D-10
HOLD TUNE/FUNCTION AND WRITE WHILE
POWERING ON.
ROLAND
D-110
no rom reset.
ROLAND
D-20
HOLD TUNE/FUNCTION AND WRITE WHILE
POWERING ON.
ROLAND
D-5
no rom reset.
ROLAND
D-50
TUNE/FUNCTION AND MIDI DATA INIT:
HOLD 0 AND DATA TRANSFER, POWER ON. PATCH + REVERB MUST BE LOADED FROM
CARD OR SYSEX FILE.
ROLAND
D-550
TUNE/FUNCTION AND MIDI DATA INIT:
HOLD PATCH BANK 2, PATCH NUMBER6, AND ENTER, POWER ON. PATCH AND REVERD
DATA MUST BE LOADED FROM CARD OR SYSEX FILE.
ROLAND
D-70
HOLD BANK 8 WHILE POWERING ON. PRESS
ENTER, THENPRESS WRITE TWICE.
ROLAND
D2
HOLD WRITE + PRESS SYSTEM. PRESS
ENTER TWICE.
ROLAND
DDR-30
HOLD #1 BUTTON AND POWER ON.
ROLAND
DEP-3
MEMORY NO UP AND DOWN BUTTONS WHILE
POWERING ON.
ROLAND
DEP-5
MEMORY NO UP AND DOWN BUTTONS WHILE
POWERING ON.
ROLAND
DJ-70
no rom reset.
ROLAND
DJ-70MKII
no rom reset.
ROLAND
DM SERIES
no rom reset.
ROLAND
DR-202
HOLD MUTE + ROLL AND POWER ON. VALUE
DIAL TO SELECT 'ALL', THEN PRESS TAP/ENTER TWICE.
ROLAND
DR-5
FRET LEFT + FRET RIGHT + POWER ON; 2
X ENTER.
ROLAND
DR-550
HOLD -1 AND +1 AND POWER ON, THEN
PRESS START.
ROLAND
DR-550MKII
HOLD -1 AND +1 AND POWER ON, THEN
PRESS START.
ROLAND
DR-660
UTILITY THEN CURSOR TO SELECT (8)
INIT; 2 X ENTER.
ROLAND
DR-670
HOLD RECORD + STOP/CONT BUTTONS AND
POWER ON. PRESS ENTER TWICE.
ROLAND
DR-770
PRESS UTILITY AND THEN CURSOR RT TO
9.F.RST. VALUE DIAL TO SELECT ALL, AND THEN PRESS ENTER TWICE.
ROLAND
DS-330
HOLD REVERB + SPLIT AND POWER ON;
PRESS YES.
ROLAND
E-5
no rom reset.
ROLAND
E-10
HOLD WRITE WHILE TURNING POWER ON.
ROLAND
E-12
no rom reset.
ROLAND
E-14US
resets at power on.
ROLAND
E-15
resets at power on.
ROLAND
E-16
resets at power on.
ROLAND
E-20
HOLD WRITE + POWER ON.
ROLAND
E-28US
resets at power on.
ROLAND
E-30
HOLD WRITE + POWER ON.
ROLAND
E-35
HOLD REC/PUNCH IN + POWER ON.
ROLAND
E-36
RECORDER + POWER ON.
ROLAND
E-56
HOLD WRITE + POWER ON.
ROLAND
E-66
RECORD (IN DISK RECORDER SECTION) +
POWER ON.
ROLAND
E-68US
HOLD WRITE + POWER ON.
ROLAND
E-70
HOLD WRITE + POWER ON.
ROLAND
E-86
<>HOLD WRITE + POWER ON.
<>ROLAND
E-96
HOLD WRITE + POWER ON.
ROLAND
E300
PRESS UTILITY. USE BUTTONS BELOW
'PAGE' TO SELECT FACTORY PRESET. PRESS EXECUTE, THEN OK. WHEN RESET
COMPLETE POWER OFF, THEN ON.
ROLAND
E500
PRESS UTILITY. USE BUTTONS BELOW
'PAGE' TO SELECT FACTORY PRESET. PRESS EXECUTE, THEN OK. WHEN RESET
COMPLETE POWER OFF, THEN ON.
ROLAND
E600
PRESS UTILITY. USE PAGE BUTTONS TO
SELECT FACTORY PRESET, THEN EXECUTE.
ROLAND
EF303
HOLD SHIFT AND THEN POWER ON. PRESS
WRITE TWICE,THEN POWER OFF AN ON AGAIN.
ROLAND
EM-10
HOLD WRITE AND POWER ON.
ROLAND
EM-101
no rom reset.
ROLAND
EM-15
HOLD THE WRITE BUTTON WHILE TURNING
ON THE POWER.
ROLAND
EM-20
HOLD WRITE AND POWER ON.
ROLAND
EM-25
HOLD THE WRITE BUTTON WHILE TURNING
ON THE POWER.
ROLAND
EM-30
HOLD WRITE AND POWER ON.
ROLAND
EM-303
resets at power on.
ROLAND
EM-305
resets at power on.
ROLAND
EM-50
HOLD WRITE AND POWER ON.
ROLAND
EP (ALL OTHER)
no rom reset.
ROLAND
EP-3
resets at power on.
ROLAND
EP-5
HOLD REC + PLAY, PRESS STRINGS, POWER
OFF / ON.
ROLAND
EP-7
HOLD REC + PLAY, PRESS STRINGS, POWER
OFF / ON.
ROLAND
EP-707
resets at power on.
ROLAND
EP-75
HOLD REC AND POWER ON.
ROLAND
EP-7MKII
HOLD REC + PLAY, PRESS STRINGS, POWER
OFF AND ON.
ROLAND
EP-85
HOLD REC AND POWER ON.
ROLAND
EP-9
HOLD REC + PLAY, PRESS CHOIR, POWER
OFF AND ON.
ROLAND
EP-95
HOLD REC BUTTON WHILE POWERING ON.
ROLAND
FA76
PRESS MENU THEN UP/DOWN TO FACTORY
PRESET. PRESSF8 TWICE ( SELECT THEN EXECUTE ) TO RESET.
ROLAND
FANTOM
PRESS MENU THEN UP/DOWN TO FACTORY
PRESET. PRESSF8 TWICE ( SELECT THEN EXECUTE ) TO RESET.
ROLAND
FC-100
no rom reset.
ROLAND
FC-100MKII
HOLD #1 + #2 + #8 AND POWER ON.
ROLAND
FC-200
HOLD #10 AND POWER ON, THEN PRESS CTL
PEDAL.
ROLAND
FG-10
HOLD CLEAR AND EXIT THEN POWER ON.
ROLAND
FG-1000
HOLD CLEAR AND EXIT THEN POWER ON.
ROLAND
FP-1
resets at power on.
ROLAND
FP-8
PRESS FUNC AND RELEASE HOLD PIANO
PRESS FUNC AGAIN.
ROLAND
FP-9
resets at power on.
ROLAND
G-600
HOLD WRITE AND POWER ON.
ROLAND
G-800
HOLD WRITE, THEN POWER ON.
ROLAND
GC-8
no rom reset.
ROLAND
GI-10
HOLD PARAMETER + AND -, POWER ON THEN
PRESS VALUE +.
ROLAND
GM-70
POLY MODE: HOLD PLAY, GENERAL EDIT, +
IND EDIT THEN POWER ON. MONO MODE: HOLD TUNE, CONTROL ASSIGN, AND DATA
TRANSFER THEN POWER ON.
ROLAND
GP-100
HOLD IN PARAMETER KNOB, POWER ON,
PRESS WRITE.
ROLAND
GP-16
HOLD #6, #7, #8, THEN POWER ON. USE
FUNCTION LEFT AND RUGHT TO SELECT "2. ALL FACTORY PRESET"THEN PRESS
WRITE 3 TIMES.
ROLAND
GP-8
no rom reset.
ROLAND
GR (ALL OTHER)
no rom reset.
ROLAND
GR-09
HOLD PEDAL #2 THEN POWER ON. PRESS
VALUE+ THEN PRESS EDIT/PLAY.
ROLAND
GR-1
HOLD WRITE/COPY THEN POWER ON THEN
PRESS YES.
ROLAND
GR-30
HOLD PEDAL #2, POWER ON. PRESS PATCH
+ TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SIMULTANEOUSLY.
ROLAND
GR-33
PRESS SYSTEM THEN PARAMETER, USE
VALUE DIAL TO SELECT ALL. PRESS WRITE TWICE.
ROLAND
GR-50
no rom reset.
ROLAND
GS-6
no rom reset.
ROLAND
GT-3
HOLD MOD AND SFX AND POWER ON. PRESS
WRITE.
ROLAND
GT-5
HOLD MOD + FEED BACKER/SLOW GEAR,
POWER ON. THEN PRESS WRITE. /TD>
ROLAND
GX-700
PRESS TUNER/UTILITY. USE PARAMETER
LEFT AND RIGHT TO SELECT FACT INIT. CURSOR TO LEFT, DIAL SYSTEM, THEN
RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY.
ROLAND
HP (ALL OTHER)
resets at power on.
ROLAND
HP-100
no rom reset.
ROLAND
HP-300
no rom reset.
ROLAND
HP-400
no rom reset.
ROLAND
HS SERIES
no rom reset.
ROLAND
JD-800
PRESS DATA TRANSFER. PAGE UP TO
SELECT FACTORY PRESET, PRESS YES.
ROLAND
JD-990
HOLD EXIT AND PRESS UTILITY. PRESS F6
THEN F5.
ROLAND
JP-6
no rom reset.
ROLAND
JP-8
no rom reset.
ROLAND
JP-8000
HOLD SHIFT, PRESS INIT/BULK. PRESS
BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT
FACTORY PRESETS.
ROLAND
JS-30
HOLD RECORD BUTTON (SEQUENCER
SECTION), POWER ON.
ROLAND
JUN0-106
no rom reset.
ROLAND
JUN0-60
no rom reset.
ROLAND
JUNO-1
no rom reset.
ROLAND
JUNO-2
no rom reset.
ROLAND
JUNO-6
no rom reset.
ROLAND
JUPITER-6
no rom reset.
ROLAND
JUPITER-8
no rom reset.
ROLAND
JV-1000
HOLD NUMBER 8, POWER ON. PRESS ENTER
THEN WRITE.
ROLAND
JV-1080
PRESS UTILITY. CURSOR DOWN ONCE THEN
RIGHT 3 TIMES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY.
ROLAND
JV-2080
PRESS UTILITY. PRESS F6 TWICE TO MENU
3. PRESS F1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OFF MEM. PROT. AND
PRESS F6 TWICE.
ROLAND
JV-30
PRESS CHORUS + REVERB (ABOVE INIT)
TOGETHER THEN PRESS VALUE UP.
ROLAND
JV-35
PRESS CONTROL + MASTER TOGETHER. USE
PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND
JV-50
PRESS CONTROL + MASTER TOGETHER. USE
PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND
JV-80
HOLD NUMBER 8, POWER ON. PRESS ENTER
THEN WRITE.
ROLAND
JV-880
PRESS UTILITY, USE DATA DIAL TO
SELECT FACTORY PRESET. PRESS ENTER TWICE.
ROLAND
JV-90
HOLD NUMBER 8, POWER ON. PRESS ENTER
THEN WRITE.
ROLAND
JW-50
PRESS TUNE/FUNCTION. PRESS F5 THEN F4
THEN F3 THEN F4.
ROLAND
JX-1
HOLD WRITE AND FLUTE THEN POWER ON.
ROLAND
JX-10
no rom reset.
ROLAND
JX-3P
no rom reset.
ROLAND
JX-8P
no rom reset.
ROLAND
KR-100
resets at power on.
ROLAND
KR-3000
HOLD FROM AND TO BUTTONS, THEN PRESS
WRITE.
ROLAND
KR-33
resets at power on.
ROLAND
KR-350
HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND
KR-3500
HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND
KR-370
resets at power on.
ROLAND
KR-4500
HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND
KR-4700
HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND
KR-500
HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND
KR-5000
HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND
KR-55
HOLD MIDI FUNCTION AND PRESS CARDS (5
SECONDS).
ROLAND
KR-5500
HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND
KR-575
PRESS FUNCTION; PAGE TO 'FACTORY
RESET'. TOUCH EXECUTE, THEN OK.
ROLAND
KR-577
PRESS UTILITY; USE BUTTONS BELOW PAGE
TO SELECT 'FACTORY PRESET'. PRESS EXECUTE, THEN OK.
ROLAND
KR-650
HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND
KR-770
HOLD PART VOLUME ACCOMP, PRESS TRACK
2 + 4 BUTTONS SIMULTANEOUSLY. USE PART VOLUME ACCOMP REPEATEDLY TO GET
FACTORY SET-UP LOAD. WHEN DONE PWR OFF/ON.
ROLAND
KR-977
PRESS FUNCTION; USE PAGE BUTTONS TO
'FACTORY RESET'. TOUCH EXECUTE, THEN OK.
ROLAND
LVC-1N
HOLD ENTER BUTTON THEN POWER ON.
ROLAND
M-760
HOLD EDIT, PRESS WRITE. PARAMETER
UP/DOWN TO SELECT ALL + PRESS WRITE. ON COMPLETION PRESS EDIT TO RETURN
TO PLAY.
ROLAND
M-DC1
HOLD F3 AND THEN POWER ON.
ROLAND
M-GS64
HOLD F3 AND THEN POWER ON.
CONTRIBUTED-: HOLD SELECT AND PRESS F4, PRESSF3 AND THEN PRESS ENTER.
ROLAND
M-OC1
HOLD F3 AND THEN POWER ON.
ROLAND
M-SE1
HOLD F3 AND THEN POWER ON.
ROLAND
M-VS1
HOLD F3 AND THEN POWER ON.
ROLAND
MBD1
HOLD F3 AND THEN POWER ON.
ROLAND
MC-303
HOLD SHIFT AND THEN POWER ON, THEN
PRESS ENTER.
ROLAND
MC-307
PRESS SYSTEM, THEN F2 (UTIL). CURSOR
DN TO FACTORY RESET. PRESS F1 AND THEN F4.
ROLAND
MC-50
no rom reset.
ROLAND
MC-505
HOLD SHIFT BUTTON AND POWER ON. PRESS
ENTER.
ROLAND
MC-50MKII
no rom reset.
ROLAND
MC-80
no rom reset.
ROLAND
MC-80EX
no rom reset.
ROLAND
MDC-1
HOLD F3 AND POWER ON.
ROLAND
ME-10
HOLD BANK DOWN PEDAL, THEN PRESS
WRITE.
ROLAND
ME-30
HOLD PARAMETER RIGHT AND VALUE WHILE
POWERING ON. PRESS WRITE/COPY.
ROLAND
ME-33
HOLD EZ TONE AND AMP/EFFECT RIGHT
WHILE POWERING ON. THEN PRESS WRITE.
ROLAND
ME-5
HOLD PEDALS 1 AND 2, POWER ON; PRESS
WRITE IMMEDIATELY.
ROLAND
ME-6
HOLD LEFT + DOWN AND POWER ON; THEN
PRESS WRITE.
ROLAND
ME-6B
HOLD LEFT + DOWN AND POWER ON; THEN
PRESS WRITE.
ROLAND
ME-8
HOLD LEFT + DOWN AND POWER ON; PRESS
WRITE/COPY.
ROLAND
ME-8B
HOLD PARAMETER LEFT + DOWN BUTTONS,
THEN PRESS WRITE/COPY.
ROLAND
ME-X
HOLD PARAMETER LEFT + DOWN AND POWER
ON, THEN PRESS WRITE.
ROLAND
MGS-64
HOLD F3 AND POWER ON.
ROLAND
MK-60
no rom reset.
ROLAND
MK-80
HOLD WRITE, PRESS EDIT. HOLD LEFT AND
RIGHT CURSOR BUTTONS AND PRESS UP.
ROLAND
MKB SERIES
no rom reset.
ROLAND
MKS-50
POLY MODE: HOLD NUMBER BUTTONS 4 AND
8 AND POWER ON.
ROLAND
MKS-50
MONO MODE: HOLD NUMBER BUTTONS 3 AND
7 AND POWER ON.
ROLAND
MMP-2
PRESS SYSTEM UNTIL LIGHTS ORANGE. USE
PAGE LEFT/RIGHT BUTTONS TO SELECT INITIALIZE. USE LEFT VALUE TO SELECT
ALL; PRESS ENTER TWICE.
ROLAND
MP SERIES
no rom reset.
ROLAND
MS-1
<>no rom reset.
ROLAND
MSE-1
HOLD F3 AND POWER ON.
ROLAND
MSQ-100
no rom reset.
ROLAND
MSQ-700
no rom reset.
ROLAND
MT-100
HOLD STOP, PRESS DELETE. AFTER THE
DISPLAY FLASHES "ALL CLEAR" PRESS EXECUTE.
ROLAND
MT-120
HOLD REPEAT, SONG (BLUE), AND PLAY,
POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD,
THEN POWER OFF/ON.
ROLAND
MT-120S
HOLD REPEAT, SONG (BLUE), AND PLAY,
POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD,
THEN POWER OFF/ON.
ROLAND
MT-200
HOLD REPEAT, SONG (BLUE), AND PLAY,
POWER ON. USE DIAL TO SELECT T-15 ON DISPLAY. PRESS PLAY THEN RECORD,
THEN POWER OFF/ON.
ROLAND
MT-300
PRESS MENU, DIAL TO FACTORY PRESET.
PRESS ENTER TWICE.
ROLAND
MT-32
HOLD MASTER VOLUME, PRESS RHYTHM
PART, PRESS PART 1.
ROLAND
MT-80
resets at power on.
ROLAND
MV-30
no rom reset.
ROLAND
MVS-1
HOLD F3 AND POWER ON.
ROLAND
OCTAPAD
HOLD MIDI CH AND NOTE NUMBER, POWER
ON. POWER OFF, THEN POWER ON AGAIN.
ROLAND
OCTAPAD II
HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND
P-330
no rom reset.
ROLAND
P-55
HOLD BOTH INSTRUMENT BUTTONS, POWER
ON, THEN PRESS PARAM 1.
ROLAND
PAD-8
HOLD MIDI CH AND NOTE NUMBER, POWER
ON. POWER OFF, THEN POWER ON.
ROLAND
PAD-80
HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND
PC-150
HOLD COMMAND (LEFT), POWER ON.
ROLAND
PC-200
HOLD THE 2 BUTTONS UNDER "STANDARD",
POWER ON.
ROLAND
PIANO PLUS (ALL)
no rom reset.
ROLAND
PK-5
HOLD OCT/PARAM AND POWER ON.
ROLAND
PK-7
no rom reset.
ROLAND
PLANET-P
no rom reset.
ROLAND
PLANET-S
no rom reset.
ROLAND
PM-16
no rom reset.
ROLAND
PMA-5
HOLD VALUE, POWER ON. TOUCH 2 CAL.
POINTS TOP RIGHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DISPLAYS
COMPLETED THEN INITIALIZE, TOUCH EXEC.
ROLAND
PRO-E
HOLD WRITE, POWER ON.
ROLAND
R-5
HOLD PAGE + SELECT AND POWER ON.
PRESS ENTER TWICE AT PROMPTS.
ROLAND
R-70
HOLD MIDI + ASSIGN AND POWER ON.
PRESS YES TWICE AT PROMPTS.
ROLAND
R-8
HOLD CURSOR PAGE AND PARAM SELECT
THEN POWER ON.PRESS ENTER TWICE.
ROLAND
R-880
no rom reset.
ROLAND
R-8M
HOLD CURSOR RIGHT AND ENTER, POWER
ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND
RA-50
HOLD WRITE THEN POWER ON.
ROLAND
RA-90
HOLD WRITE THEN POWER ON.
ROLAND
RA-95
HOLD REC, POWER ON.
ROLAND
RD-150
HOLD THE PLAY AND REC BUTTONS WHILE
POWERING ON.
ROLAND
RSP-550
POWER ON WHILE HOLDING PROG PAGE UP
AND DOWN, THEN PRESS WRITE.
ROLAND
SB-55
POWER ON WHILE HOLDING CLEAR BUTTON.
ROLAND
SC-155
POWER IN STANDBY MODE. HOLD BOTH
INSTRUMENT BUTTONS, PRESS POWER ON AND THEN PRESS ALL.
ROLAND
SC-33
HOLD SPLIT AND REVERB WHILE POWERING
ON, THEN PRESS YES.
ROLAND
SC-50
HOLD BOTH INSTRUMENT BUTTONS AND
POWER ON. THEN PRESS ALL.
ROLAND
SC-55
HOLD BOTH INSTRUMENT BUTTONS AND
POWER ON. THEN PRESS ALL.
ROLAND
SC-55MKII
HOLD BOTH INSTRUMENT BUTTONS AND
POWER ON. THEN PRESS ALL.
ROLAND
SDD-320
no rom reset.
ROLAND
SH-101
no rom reset.
ROLAND
SH-2000
no rom reset.
ROLAND
SN700
no rom reset.
ROLAND
SP700
no rom reset.
ROLAND
SPD-11
HOLD ALL/ENTER WHILE POWERING ON.
PRESS ALL/ENTER AGAIN.
ROLAND
SPD-8
HOLD EDIT BUTTON WHILE POWERING ON.
ROLAND
SRV-1000
no rom reset.
ROLAND
TB-303
no rom reset.
ROLAND
TD-10
HOLD SETUP AND EXIT KEYS AND TURN
POWER ON, THENPRESS F4.
ROLAND
TD-7
PRESS SYSTEM. CURSOR TO 'INT' AND
PRESS ENTER. CURSOR TO 'HIHAT' THEN DATA DIAL TO SELECT 'ALL'. PRESS
ENTER TWICE.
ROLAND
TD-8 V CUSTOM
PRESS SETUP THEN [F3 (MENU)]. PRESS
INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO
"RESET".
ROLAND
TR-505
HOLD PATTERN GROUP A AND MODE AND
POWER ON.
ROLAND
TR-626
HOLD TRACK #1 AND MODE AND POWER ON.
ROLAND
TR-707
HOLD TRACK WRITE AND PATTERN 1 AND
POWER ON.
ROLAND
TR-727
HOLD TRACK WRITE AND PATTERN 1 AND
POWER ON.
ROLAND
TR-808
no rom reset.
ROLAND
TR-909
HOLD TRACK #1 AND PATTERN #1 AND
POWER ON.
ROLAND
U-110
HOLD THE EDIT AND PART BUTTONS AND
POWER ON.
ROLAND
U-20
no rom reset.
ROLAND
U-220
no rom reset.You need a U-220
Factory-Preset memory-cart.
1. Memory press Jump and value up arrow
2. enter ROM play mode
3. hold mark and jump press enter
4. hold mark press part inst right arrow
5. press enter
6. press value
7. hold mark & jump & press exit
ROLAND
VP-70
HOLD MIDI, PLAY, AND VOICE EXP AND
POWER ON.
ROLAND
VS-1680
no rom reset.
ROLAND
VS-1680EX
no rom reset.
ROLAND
VS-1824
no rom reset.
ROLAND
VS-1824CD
no rom reset.
ROLAND
VS-1880
no rom reset.
ROLAND
VS-2480
no rom reset.
ROLAND
VS-2480CD
no rom reset.
ROLAND
VS-840
no rom reset.
ROLAND
VS-840EX
no rom reset.
ROLAND
VS-840GX
no rom reset.
ROLAND
VS-880
no rom reset.
ROLAND
VS-880EX
no rom reset.
ROLAND
VS-890
no rom reset.
ROLAND
VT-1
HOLD PRESET/USER BUTTON AND POWER ON.
ROLAND
W-30
no rom reset.
ROLAND
W-50
PRESS CONTROL AND MASTER BUTTONS
SIMULTANEOUSLY.USE PARAMETER UP AND DOWN BUTTONS TO SELECT ALL. PRESS
VALUE UP BUTTON.
ROLAND
XP-50
PRESS DISK UTIL, SELECT SOUND, THEN
PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER.
(REMEMBER TO SET MEM PROTECT BACK ON ).
ROLAND
XV-5050
PRESS UTILITY AND CURSOR LEFT
BUTTONS. VALUE DIAL TO SELECT FACTORY RESET AND PRESS ENTER TWICE.
ROLAND
XV-5080
PRESS SYSTEM/UTILITY SO LIGHT
BLINKING. PRESS F6 AND THEN F5. PRESS F6 (EXECUTE) AGAIN.
ROLAND
XV-88
PRESS UTILITY, CURSOR DOWN TO UTIL
PAGE 2. PRESS4 (BASS), PRESS ENTER TWICE.
YAMAHA
YAMAHA
02R
HOLD "CURSOR LEFT" AND POWER ON.
YAMAHA
CLP-100
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-121
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-121S
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-122
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-122S
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-123
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-124
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-133
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-134
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-152
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-152S
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-153
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-153S
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-153SG
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-154
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-154F
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-154S
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-155
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-156
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-157
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-158
HOLD KEY "F0" OR KEY "B1" AND POWER
ON.
YAMAHA
CLP-20
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-250
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-260
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-30
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-311
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-350
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-360
HOLD KEY "F0" AND POWER ON.
YAMAHA
CLP-411
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-500
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-511
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-550
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-555
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-560
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-570
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-611
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-705
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-711
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-760
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-811
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLP-911
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLW-12
HOLD KEY "B1" AND POWER ON.
YAMAHA
CLW-14
HOLD KEY "B1" AND POWER ON.
YAMAHA
CS1X
HOLD BUTTONS 7, 8, AND 9, AND POWER
ON.
YAMAHA
CS2X
HOLD BUTTONS 7, 8, AND 9, AND POWER
ON.
YAMAHA
CVP-105
HOLD DOWN THE RIGHTMOST KEY (C7) AND
POWER ON.
YAMAHA
CVP-35
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-45
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-49
HOLD KEY "F0" AND POWER ON.
YAMAHA
CVP-50
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-55
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-59
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-65
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-69
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-69A
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-70
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-75
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-79
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-79A
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-83
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-83S
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-85
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-85A
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-87
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-87A
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-89
HOLD KEY "B1" AND POWER ON.
YAMAHA
CVP-89WH
HOLD KEY "B1" AND POWER ON.
YAMAHA
D2040
PRESS 'PEQ/D.ATT' KEY OF CHANNEL 1
AND 'LIMIT/COMP' OF CHANNEL 3 AND POWER ON.
YAMAHA
D5000
PRESS STORE AND POWER THEN PRESS
RECALL.
YAMAHA
DD-11
no rom reset.
YAMAHA
DDL3
RUN TEST PROGRAM. PRESS 'RECALL' AND
THEN PRESS 'STORE'.
YAMAHA
DEQ5
HOLD THE 'L' AND 'FLAT' KEYS AND
POWER UNIT ON. PRESS 'RECALL'.
YAMAHA
DEQ5E
RUN TEST MODE. WHEN TEST 10 IS
PERFORMED, UNIT IS INITIALIZED AND FACTORY PRESETS ARE RESTORED.
YAMAHA
DEQ7
HOLD DELAY/LEVEL AND PROTECT ON/OFF,
POWER ON.
YAMAHA
DMP-11
PRESS FADER FLIP, PARAMETER LEFT,
POWER ON.
YAMAHA
DMP-7
PRESS FADER FLIP, PARAMETER LEFT,
POWER ON.
YAMAHA
DMP9-16/8
PRESS MEMORY [RECALL], RETURN [SEL],
[UTILITY], THEN POWER ON.
YAMAHA
DOU10
PRESS SHIFT AND POWER ON.
YAMAHA
DTS70
PRESS UTILITY AND STORE WHILE
POWERING ON.
YAMAHA
DX-7II
INSERT ROM CARTRIDGE AND POWER ON.
YAMAHA
DX-7S
INSERT ROM CARTRIDGE AND POWER ON.
YAMAHA
EMP-700
PRESS F1 AND ^ WHILE POWERING ON.
YAMAHA
FX-500
HOLD COMP AND MOD WHILE POWERING ON.
YAMAHA
FX-770
HOLD COMP AND PLAY WHILE POWERING ON.
YAMAHA
GW-10
HOLD CHO WHILE POWERING ON.
YAMAHA
GW-33
HOLD DOWN/NO AND UP/YES WHILE
POWERING ON.
YAMAHA
MDP-2
HOLD SHIFT AND POWER ON.
YAMAHA
MFC-10
HOLD MEMORY, EDIT, AND FC EDIT AND
POWER ON.
YAMAHA
MLP-11
HOLD KEY "B1" AND POWER ON.
YAMAHA
MLP51
HOLD KEY "F0" AND POWER ON.
YAMAHA
MU-90
HOLD ENTER AND UTIL WHILE POWERING ON.
YAMAHA
P-100
HOLD KEY "B1" AND POWER ON.
YAMAHA
P-150
HOLD KEY "B1" AND POWER ON.
YAMAHA
P-300
HOLD KEY "B1" AND POWER ON.
YAMAHA
P-500
HOLD KEY "B1" AND POWER ON.
YAMAHA
PDP-300
HOLD KEY "F0" AND POWER ON.
YAMAHA
PDP-400
HOLD KEY "B1" AND POWER ON.
YAMAHA
PDP-500
HOLD KEY "B1" AND POWER ON.
YAMAHA
PROMIX 01
PRESS STORE AND INC+ WHILE POWERING
ON.
YAMAHA
PSR-220
PRESS YES AND NO WHILE POWERING ON.
YAMAHA
PSR-230
PRESS YES AND NO WHILE POWERING ON.
YAMAHA
PSR-410
HOLD [+] AND [-] AND POWER ON.
YAMAHA
PSR-420
HOLD [+/YES] AND [-/NO] AND POWER ON.
YAMAHA
PSR-510
HOLD [+] AND [-] AND POWER ON.
YAMAHA
PSR-520
HOLD [+/YES] AND [-/NO] AND POWER ON.
YAMAHA
PSR-530
HOLD RIGHT-MOST WHITE KEY ON THE
KEYBOARD WHILE TURNING ON THE POWER.
YAMAHA
PSR-6000
UTILITY MODE, RECALL PRESET DATA,
SELECT ALL DATA.
YAMAHA
PSR-620
HOLD [+/YES] AND [-/NO] AND POWER ON.
YAMAHA
PSR-6300
HOLD KEY "C6" AND POWER ON.
YAMAHA
PSR-70
HOLD KEY "C5" AND POWER ON.
YAMAHA
PSR-9000
HOLD DEMO AND POWER ON.
YAMAHA
PSR-A3
HOLD [+/YES] AND [-/NO] AND POWER ON.
YAMAHA
REV-100
PRESS STORE BUTTON WHILE POWERING ON.
THEN PRESS V AND STORE.
YAMAHA
RX-8
HOLD STOP/CONTINUE, +1/YES, AND -1/NO
AND POWER ON.
YAMAHA
SPX-90
HOLD BALANCE, FOOT TRIGGER AND POWER
ON.
YAMAHA
SPX-90II
HOLD BALANCE, FOOT TRIGGER AND POWER
ON.
YAMAHA
SPX990
HOLD PAGE, STORE, AND BYPASS WHILE
POWERING ON. also test #8 is ram initialization.
YAMAHA
TMX
HOLD UTILITY AND STORE THEN POWER ON.
YAMAHA
YDP-200
HOLD KEY "F0" OR KEY "B1", WHILE
POWERING ON.
YAMAHA
YDP-300
HOLD KEY "F0" OR KEY "B1", WHILE
POWERING ON.
YAMAHA
YDP-301
HOLD KEY "B1", WHILE POWERING ON.
YAMAHA
YDP-88
HOLD KEY "B1", WHILE POWERING ON.
YAMAHA
YDP-88II
HOLD KEY "B1", WHILE POWERING ON.
ZOOM
ZOOM
505
HOLD THE STORE BUTTON WHILE POWERING
ON. DISPLAY FLASHES "AL"; PRESS STORE AGAIN.
ZOOM
506II
HOLD STORE BUTTON WHILE PLUGGING IN
ADAPTOR. PRESS STORE ONCE MORE.
